Installing RV Cam Locks

Ad Details

  • Ad ID: 1322

  • Added: November 27, 2021

  • Views: 58

Description

Why do RV camper manufacturers recommend quick release coupling for your camper? After all, aren’t camper parts sold separately like motorcycle parts? Actually, the truth is, RV manufacturers tend not to use the quick release coupling when building recreational vehicles, travel trailers, fifth wheels and other similar recreational vehicles. Yes, somebody could walk through an average RV park and very quickly open all the storage areas with just one key. It’s not that they want to cause trouble – it’s just darned expensive to buy a whole truckload of camper parts to go along with this one key!

So why don’t they use a cam locks or some other locking device? There’s a couple of reasons – first, they don’t have the money to mass produce their own locking systems. Second, they want to retain control of their product. Third, they don’t want anybody else putting their mind to it and figuring out a way to unlock your valued vehicle. And finally, they are afraid of technology…

So what do you need in order to open your vehicle’s storage compartments? First, you need a good screwdriver and some pliers. Since most camper cabinets are made of metal, there is a good chance that you have some screws that have been stripped. You can use a pair of pliers to strip the screw heads off and then you can use your screwdriver to pry them loose. When you have the stripped screws in your hands, you can easily pull out the interior trim panel and insert the new ones.

If you can’t get access to the interior trim panel, you may need to use a flat head screwdriver or pliers in order to take out the wiring harnesses from the inside of your rv cam locks. This is where you will need to replace the old locking mechanism if you want your stored vehicle to open with the new lock. It’s fairly easy to find replacement locks online at affordable prices – you should also note that most of the time you won’t be able to get access to all of the wiring harnesses, which is why you usually need to buy whole assemblies online. As long as you can find what you need, you shouldn’t have any problems securing the right replacement lock for your RV storage compartments.

You’ll need to replace your interior trim panels after you take out the old rv cam locks. While there are different sizes, most locking mechanisms use standard sized holes that go all the way through the cover. You can use a screwdriver to remove them and then you can remove the trim panels to access the wiring harnesses. After you’ve done that, it’s time to move on to removing the doors. Here you will need some extra patience, because if you use too much force, you could ruin one of the door panels on your camper.

The next thing you’ll want to do is disassemble the RV cam locks, starting with the first door (the one nearest to the driver’s compartment). You’ll need to remove the screws, and then take out the pins. The plastic exterior trim has two screws holding it in place, so you’ll have to pry it loose with a screwdriver or pliers. Remove it and discard it. Next, disassemble the door furthest away from the driver’s compartment, and the one closest to the rearward corner of the camper.

On both sides of the door, you’ll see one screw holding the door inside and one screw holding the window down, so take these out too. If you loved this article and you would like to obtain more info with regards to Https://Leglittz.com/ please visit our web site. Take note that the inside window casing should not be stripped, nor the metal keyed alike plastic exterior trim. After doing that, lay the pieces back on top of each other, and install the keyed alike plastic exterior trim, keeping in mind that it should fit precisely into its place.

Now, install the replacement locks on top of the new ones, matching up with the colors exactly. Secure them into place using the screws that came with the purchase of your camper. Close all the compartments except the cargo area. Replace the keyed locks on all the windows and replace the exterior trim. Finally, reconnect the batteries to turn your motor back on, and you are now ready for a long, relaxed night’s sleep in your camper.

Tags :